Light Alloy Wheels for a Isuzu DMAX (2012 Onwards)

If you are looking for quality alloy wheels for your Isuzu DMAX (2012 Onwards), then here at R-Tec Auto Design we are able to supply and fit or just deliver alloy wheels direct to your door using fast and efficent 24hr couriers. R-Tec Auto Design is the largest retailer and e-tailer of Alloy Wheels in the UK. Please browse our website using our alloy wheel visualiser to see the wheels we sell on your Isuzu DMAX (2012 Onwards). We stock over 2000 wheels and can send wheel and tyre sets via courier to you within 24-48 hours. Our superstore and our fitting workshop is based in St Albans Hertfordshire but we also have a warehouses located up and down the country which stock Alloy Wheels, and although we don't currently allow collections from our warehouses we can often ship Alloy Wheels direct from our warehouse / supplier to addresses, saving you time and money in the long run…

At R-Tec Auto Design, we pride ourselves on our extensive knowledge ofalloy wheels, tyres, suspension, lighting and engine upgrades for Isuzu DMAX (2012 Onwards)'s. So If you are looking for the best source of a wide range of quality alloy wheels (or other car parts for a Isuzu DMAX (2012 Onwards) then look no further than RTec. Our online store features a broad selection of alloys from some of the biggest brands and leading manufacturers, all of which are available at highly competitive prices.

If you want to add an impressive finishing touch to your Isuzu DMAX (2012 Onwards), our alloys could be the perfect investment.

At any one time we stock over 500 sets of alloy wheels from the likes off: AC Schnitzer, Advanti Racing, AEZ Wheels, Alpina Wheels, Alutec Wheels, Antera Wheels, ASA Wheels, ATS Wheels, Autec Wheels, AXE and many others.

Start shopping for Alloy Wheels for a Isuzu DMAX (2012 Onwards) now...

Search Parts for a Isuzu DMAX (2012 Onwards) now...

Isuzu DMAX (2012 Onwards) Laser Wheel Alignment (Not just Tracking!)

At our St Albans store, we are able to offer 4 Wheel Full Laser Wheel Alignment for a Isuzu DMAX (2012 Onwards). If you would like to know more about geometry or alignment including Camber, Toe and Caster settings for a Isuzu DMAX (2012 Onwards), please give us a call and we will be able to help.

Full fitting service at our St Albans store

Most people have a friend who's handy with a spanner, but wheels or tyres that are fitted incorrectly on a Isuzu DMAX (2012 Onwards) it can be dangerous and affect your vehicles handling and warranty. Our superstore in St Albans, Hertfordshire offers a full installation service for the majority of products we offer, all fully installed by our trained technicians. Our fitting is fully backed by our workshop guarantee. If a product fails that we supplied and fitted within the first year, we will remove and re-install free of charge.

So Remember if you want to buy the correct Tyres or Wheels for your Isuzu DMAX (2012 Onwards) call R-Tec Auto Design and we can supply you the correct tyres at the right price and deliver them to your door.

Choosing Larger Wheels and Tyres for a Isuzu DMAX (2012 Onwards)

Besides appearance, plus sizing your wheels and tyres is the best way to improve both the performance and appearance of your vehicle. By using a larger diameter wheel with a lower profile tyre it's possible to properly maintain the overall diameter of the tyre, keeping odometer and speedometer changes negligible. By selecting a tyre with a short sidewall, you gain quickness in steering response and improved lateral stability. The visual appeal is obvious; most wheels look better than the sidewall of the tyre, so the more wheel and less sidewall there is, the better it looks. If a car has a 15-inch wheel, then upgrading to a 16-inch wheel would be plus one and a 17-inch wheel would be plus two. You could also say that if a car has a 17-inch wheel (such as many performance cars do) then going to an 18-inch wheel and tyre would be a plus one. If the car has 15-inch wheels, the 18's would be a plus three.

The benefits of a quality alloy wheel for your Isuzu DMAX (2012 Onwards) is that you end up with reduced unsprung weight compared to OE wheels. This is a factor affecting a vehicle's road holding ability. Unsprung weight is the portion of a vehicle that's not supported by the suspension (i.e. wheels, tyres & brakes) and therefore is most susceptible to road shock and cornering forces. By reducing unsprung weight, alloy wheels provide more precise steering input & improved cornering characteristics. The added strength of a premium grade alloy wheel can also reduce tyre deflection in cornering. This is particularly critical in a car equipped with high performance tyres where lateral forces may approach 1.0g. Better brake cooling is another benefit. The metals in alloy wheels are excellent conductors of heat and improve heat dissipation from the brakes. The risk of brake fade is also reduced under more demanding conditions such as spirited driving in the Welsh mountains. Additionally, alloy wheels can be designed to allow cool air to flow over the brake calipers & rotors. The last 10 vehicles R-Tec fitted wheels to is...:

Vauxhall ASTRA 20 Turbo VXR (2005 Onwards)
Skoda OCTAVIA II Face Lift (2009 Onwards)
Mazda RX7 (1979 to 1984)
Toyota FUN CARGO (1999 to 2004)
Vauxhall CORSA 5 Stud (2003 to 2006)
Fiat STRADARITMO (1982 to 1987)
Nissan SUNNYPULSARSENTRA (1990 to 1995)
Jaguar XJ12 (1995 to 1997)
Dodge NEON 4x100 (1994 to 1995)